NS Services Well

HYDRARIG HR560

HYDRARIG HR-560   CTU - III

HYDRARIG HR-560   CTU - III

 

This coil tubing unit is consisted of three main components: (1) tractor with wet kit, (2) trailer with cabin, reel and injector head and (3) crane track. the trailer utilize the tractor as the power pack for all power.  the trailer  consist: the control cabin (mounted on the top deck of the trailer), the reel (mounted through the trailer to assure legal road height) and the injector head is mounted on a tilt stand behind the reel to allow tubing to remain stabbed during transit. the stripper is remain mounted to injector during transit.  the coil tubing unit is road legal . the crane truck is special designed for ct injector loading in wellhead area and designed as carrier of ct accessories (generator, high pressure lines, risers, adjustable choke and crossovers). the crane truck is road legal.

Note: This equipment was not design to work on extreme cold temperature.

Technical data - HYDRARIG HR-560

Manufacturer ''HYDRA RIG‘’
CTU Type Trailer mounted coiled tubing unit with HR-560 injector head and tractor mounted wet kit
Year of production 2007.
Tractor type Kenworth C500B, 6 X 6 tractor; 21,000 lb front axle load; 46,000 lb rear tandem load. Engine; CAT C-12 rated at 430 HP @ 1900 RPM. Allison 4500RDS transmission with 5-speed automatic transmission.
Trailer Drop deck design with 85,000 lb GVWR, approximately 44’ long, lower deck of trailer is split beam design, for recessed reel mounting. Three axles 22,500 LBS each with hutchens 6 – spring suspension. 
Wet kit Wet kit is bolted to tractor frame to drive following pumps: Denison P-11 bi-directional, dual vane pump and  pressure compensated pump
Hydraulic reservoir Capacity minimum of 140 gallon with sight gauge
Type of injector head  HR-560  (Hydra Rig)
Injector power 100 horsepower continuous (150 horsepower intermittent) with100  0 F ambient conditions

Working possibilities (Sizes of coiled tubing)  1'' through 2 3/8''
Maximum pulling capacity 60,000 lb – continuous lifting
Maximum  pushing capacity 26,000 lb - continuous snubbing
Maximum speed 200 feet/min (minimum displacement) 
Lifting capacity 60,000 lb through outer frame and from stripper
Maximum speed 136 feet/min (maximum displacement) 
Slow speed control for drilling applications Yes, inches per minute smooth operating speed
Gripper system Designed for up to 120, 000 lbs tubing
Traction System Patented ''Quick Connect'' gripper system
Injector head dimensions and weights L = 54 ¾'', H = 89'', W = 52 ¼''
m = 8,100 lbs
Gooseneck radius R = 72 ''
Length of hydraulic hoses Injector power hoses, BOP and injector control hose are all length  125 FT

 

Tubing reel Pedestal mounted in recessed reel trailer
Reel dimensions Core dia. 84" , flange dia. 135''  and drum width 70''
Reel capacities Coil 1 ¼'' – 9,000 m, coil 1 ½'' – 6,500 m and coil 1 ¾'' – 4,500 m
Трубки счетчик Model; RC 200 – reads in meters and is sized for 1 ½'' coil tubing
Manifold on the reel All manifolds (internal plumbing, external plumbing and circulating swivel) are designate for WP 10,000 PSI and H2S service
Coil tubing installed on the reel 5050 m of 1 ½’’ X 0.109’’ wall thickness QT 900
Stripper packer With side door,WP 10,000 PSI,  H2S service, 3.06’’ bore
Blowout preventer Quad BOP (Blind ram assembly, shear ram assembly, slip ram assembly and pipe ram assembly) WP 10,000 PSI, H2S service, 3.06’’ bore. BOP side outlet flange, 2.06’’ bore WP 10,000 PSI, H2S service,
Riser section 5 foot long , 2 ½’’ ID, WP 10,000 PSI,  H2S service – QUANTITY 2
Riser section 8 foot long , 2 ½’’ ID, WP 10,000 PSI,  H2S service – QUANTITY 2
Pup joints Weco integral 1 ½ ‘’ X 6’, end connection 2’’ Fig 1502 M X F. WP 10,000 PSI, for sour gas service -   QUANTITY 12
High pressure swivel joints With short radius hammer union end 1 ½ ‘’ , end connection 2’’ Fig 1502 M X F. WP 10,000 PSI, for sour gas service -   QUANTITY 6

 

Adjustable choke 1’’ ID, WP,  end connection 2’’ Fig 1502 M X F. WP 10,000 PSI, for sour gas service -   QUANTITY 2
Crane truck Kenworth C500B, 6 X 6 tractor; 21,000 lb front axle load; 46,000 lb rear tandem load. Engine; CAT C-12 rated at 430 HP @ 1900 RPM. Allison 4500RDS transmission with 5-speed automatic transmission. 
Crane ‘’NATIONAL 880D’’ Boom: 4 section, all hydraulic telescopic boom, 24’6’’ retracted, 80’ fully extended. Max. load capacity is 46,000 LBS 
Yard spooling reel Tubing handling reel for spooling pipe from wooden or steel shipping spools. Oilfield boxed tubing skid mounted with outboard sling lifting lugs. Skid is telescoping (expandable) to accommodate steel spools and wooden spools of maximum width of 80’’ and max. O.D. 154’’.